Sensaphone Express II User Manual download pdf (Page 36)

Sensaphone

Express II User’s Manual

DIAL OUT [2]

The following parameters control how Express II

communicates when it dials out for an alarm.

1. Dialing Method—This parameter determines

whether Express II will dial out using tone or pulse

dialing. The programming choices for this parameter

are Pulse, Tone, or Automatic.

Automatic instructs Express II to determine whether

to dial out in tone or pulse automatically.

NOTE: You must have a dedicated phone line for

Express II to use the Automatic method. If you

have Express II installed on an office system

that requires dialing an access number to

reach an outside line, you MUST program this

parameter as Tone or Pulse.

The default setting is AUTOMATIC. The choices

under “Dialing Method” are:

1 = Pulse; 2 = Tone; 3 = Automatic.

2. Retries on Busy—This determines how may times

Express II will hang up and attempt to recall a phone

number when it detects a busy signal. This parameter

may be programmed from 0–15. The default is 0.

NOTE: Each retry applies toward the Maximum

number of calls.

3. Message Repeat—When Express II dials out and

the call has been answered, this parameter determine

s how many times the unit will recite the recorded

alarm message per call. This parameter may be

programmed from 0 to 10 repetitions. The default is

4. Maximum Number of Calls—This parameter

determines the maximum number of calls

Express II will make if the unit does not receive

acknowledgment. The maximum calls may be

programmed from 0 to 65,535. The default is

100. If the Express II has only one phone number

programmed to dial out for a particular alarm, it

will limit the maximum calls to 15 regardless of the

Maximum number of calls programmed.

5. Call Delay Time—This parameter is the length

of time that Express II will wait after an alarm is

recognized before it starts the dial out sequence.

(Note: This is not the same as input recognition time.)

Sensaphone

Express II User’s Manual

DIAL OUT PARAMETERS

1-Dialing Method:

1) Press PROGRAM.

2) Press DIAL-OUT.

DIAL-OUT menu will then appear on

local display.

3) Press 1 for Dialing Method.

Press 1 for Pulse.

Press 2 for Tone.

Press 3 for Automatic.

2-Retries on Busy:

Return to Dial-Out menu.

1) Press

2 for RETRIES ON BUSY.

2) Press the amount of retries desired

using the number keys. Press

ENTER.

3-Message Repeat:

Return to Dial-Out menu.

1) Press

3 for MESSAGE REPEAT.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 93 94

Comments to this Manuals

No comments

Sensaphone Express II User Manual Page 36

Comments to this Manuals

Related products and manuals for Communication Sensaphone Express II