Sensaphone Express II User Manual download pdf (Page 46)

Sensaphone

Express II User’s Manual

POWER [7]

Express II monitors AC power failure and low

battery condition. Power monitoring and low battery

monitoring is explained below.

1= AC Power

2= Battery

Power Failure

1. Power Failure Monitoring enable/disable—This

command enables or disables the power failure

detection. When enabled, Express II will monitor

power and dial out if a valid failure occurs. When

disabled, Express II will not dial out for a power

failure. 1 = disable, 2 = enable. The default is

enabled

2. Power Recognition Time—The power

recognition time is the length of time that a power

failure must exist continuously before Express II

will recognize it as an actual alarm and initiate

the dial out sequence. Power recognition time may

be programmed from 0 seconds to 12 hours. The

default is

5 minutes.

3. Alarm Reset Time—After power failure is

acknowledged, Express II stops the dial out

sequence. However, the power failure condition will

still exist until power is restored. If the power is not

restored after a certain amount of time, Express II

can be programmed to restart the dial out sequence.

This is called the alarm reset time. This parameter

may be programmed from 0 seconds to 12 hours.

If the alarm reset time is programmed to 0 seconds,

the feature is disabled. Express II will not restart

the dial out regardless of how long the alarm exists.

4. Dial Out Selection—You may program Express

II to call a specific set of Phone Contacts for power

failure only. This is called the Dialout Selection. To

return to the default setting, all contacts, press “9”

“9,” and then press ENTER.

Sensaphone

Express II User’s Manual

POWER PARAMETERS

AC POWER

1) Press Program.

2) Press Power.

3) Power menu will appear. Press 1 for

AC Power Parameters.

The AC Power menu will then be

displayed.

1-Power Failure Monitoring:

1) At the AC Power menu press 1 for

Failure Monitor.

2) Press

1 to disable.

Press 2 to enable.

2-Power Recognition Time:

1) Press 2 at the AC Power menu.

2) Enter hours.

Enter minutes.

Enter seconds.

3-Alarm Reset Time:

1) Return to the AC Power menu. Press 3

for Alarm Reset time.

2) Enter hours.

Enter minutes.

Enter seconds.

4-Dialout Selection:

1) Press 4 at the AC Power menu for Dial

Out Selection.

2) Enter the list of position numbers,

(1-

48), for those contacts to be dialed by

Express II in the event of AC Power

Failure. (Failure monitor must be

enabled

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 93 94

Comments to this Manuals

No comments

Sensaphone Express II User Manual Page 46

Comments to this Manuals

Related products and manuals for Communication Sensaphone Express II